Апдейты/апгрейды софта (1 онлайн

Снимок экрана 2020-09-14 в 18.00.11.png
 
  • Like
Реакции: TrDI и Elle

The changes since the initial 1.0.0 release:
  • Two new reverb/delay modes: Great Magellanic Cloud and Triangulum
  • VST3 (in addition to VST2.4, AAX, Audio Units)
  • Signed and notarized installer for macOS (ready for Big Sur)
  • Signed installer for Windows
  • New presets
  • 64-bit only
 
ВНЕЗАПНО! Нейтив решил хайпануть по-тихому
1601495704035.png

Во-первых, это с высокой степенью невероятности значит, что работа над поддержкой ВСТ3 ведётся полным ходом
Во-вторых, это говорит о том, что реакторовские синты возможно будут собирать отдельными ДЛЛками, что в общем-то мейк э лот оф сенс, учитывая, что им надо будет работать в Машине+
В-третьих, возможно, супер-8 скоро тоже появится в Машине+

Ну а что касается новой версии софта обычной Машины, то достаточно оставить вот это видео


Что там за изменения в Контакте 6 не написано, вероятно просто релиз с багфиксами под Машину+ и прочее
 
А ещё, AOM обновление 1.11.1
Improvements
  • [All Plugins] Plugins now keep parameter values unchanged when non-number text is entered to value box.
  • [Nu Compressor] Integrate block diagrams in manual.
  • [Nu Compressor] Add monitor level adjustment when internal side-chain is selected and side-chain monitoring is enabled.
Bug fixes
  • [Nu Compressor] Correct plugin latency samples reported to host.
  • [All Plugins] Value box keeps entered text when invalid or out-of-range value is entered to value box. – Fixed.
 
  • Like
Реакции: Arlekin и Andruha
Viper 1.0.7

• New ADSR modulation destinations
• Improved Analog randomization
• Improved PWM sound
• Improved LFO speed and made it faster
• Improved Filter Resonance scale
• Fixed crashes when loading Wavetables
• Fixed crashes when using Viper with low samplerates
• Fixed voice bug when exporting
• Fixed Waveform preset not loading correctly
• Fixed Waveform phases
• Fixed Osc 3 phase bug
• Fixed Osc 3 pulse PWM bug
• Fixed Arp GUI redraw issues
• Fixed minor LFO bugs
• Fixed bug in buttons when sections were locked
• Fixed bugs in Rate and Bit Reducers
 
Youlean Loudness Meter 2.4.1
  • Fixed VST plugin not showing inside EDIUS.
  • Fixed VST3 constantly resetting in Adobe Audition.
  • Fixed AU plugin not working on some older macOS versions.
  • Fixed crash that can occur if loading saved project and using timecode with the auto-reset off.
  • Fixed loudness target knob using frac position when manually setting.
  • Fixed CPU spike when resetting the graphs.
  • Fixed audio dropouts when using higher sample rates.
  • Fixed FCPX muting channels when rendering and using 5.1 channel configuration.
  • Fixed slow analysis with lower sample rates.
  • Fixed mono mpg files do not work with drag and drop on Windows.
  • Fixed drag and drop not working with mono or multichannel AIFF files on macOS.
  • Fixed true peak max value sometimes not shown in the excel export.
  • Fixed true peak not correct on mouseover when the relative scale is used.
  • Fixed export creating incomplete graphs for PDF and SVG files.
  • Fixed SmartScreen warning on Windows.
  • Fixed crash with VST2 and DAVID MultiTrack Editor.
  • Fixed crash in Cakewalk.
  • Fixed crash with VST2 and WaveLab.
  • Fixed crash with Adobe Audition.
  • Fixed crash with Adobe Premiere Pro.
  • Fixed crash with Sound Forge Pro 12.
  • Fixed crash when analyzing huge files on Windows.
  • Fixed audio glitches when using VST2 inside Adobe Premiere Pro.
  • Fixed big RAM usage when analyzing big files.
  • Improved VST2 stability in some DAWs.
  • Improved VST3 stability in some DAWs.
  • Rewritten GUI engine. Hardware acceleration is now supported.
  • If hardware acceleration is not supported, software rendering will be used.
  • Added hold CTRL to set the default preset in the drop-down menu.
  • Added option to show both integrated relative and dialog gated readout at the same time.
  • Added Analyze File menu item on the standalone application.
  • Added HBO, Disney+, EBU R128 S2, and EBU R128 S2 Music streaming presets.
  • Added remaining time info for drag and drop.
  • Added support for RF64 WAV encoding for analyzing 4GB+ files.
  • Removed message box information when exporting graphs.
  • Removed support for macOS 10.7.
  • Analyze multi mono files as one file by using .L.wav, .R.wav, etc. extensions with drag and drop.
  • Changing the preset won't reset the measurements unless required.
  • Collapsed groups inside drop-down menus are now saved globally.
  • Changed color of the focus rectangle in order to make the text more readable.
  • The export custom path will be globally retained.
  • Other small UI, UX improvements.
 
  • Like
Реакции: Nagor, X-Quality и Andruha
возможно будут собирать отдельными ДЛЛками
Эх.. Я мечтаю о такой возможности в самом Реакторе - сделал энс и упаковал его в длл..Это было бы восхитительно...
 
Эх.. Я мечтаю о такой возможности в самом Реакторе - сделал энс и упаковал его в длл..Это было бы восхитительно...
Да я думаю что многие разрабы под реактор мечтают о таком, но далеко не факт, что нейтив сделает это доступным для всех. Например из соображений сохранения открытого кода в Reaktor User Library. А вот предоставлять такую фичу для тех, кто решится сделать с ними Powered By Reaktor инструмент - вполне могу себе представить. Но вообще это всё вилами по воде - у меня инсайда никакого нет на эту тему, увы.
 
  • Like
Реакции: Magnet и Zit
Falcon has been updated to version 2.1.0
- New Feedback Machine FX
- New Magnetic Bass Shaper FX
- New Step Arp script
- New Gate Mod, Gate Mod Poly and Gate Mod Bernoulli scripts
- New Chord Strum script
- New record option to Arpeggiator
- Various enhancements
- 40 new Wavetables
- 100 new Factory Presets
 
Да я думаю что многие разрабы под реактор мечтают о таком, но далеко не факт, что нейтив сделает это доступным для всех.
Мне видится, что это можно было бы решить оптимально для желающих получить такую фичу... Как вариант сделать дополнительную платную лицензию на такую возможность, но эта возможность расширила бы круг пользователей не владеющих самим Реактором, но позволило бы им пользоваться созданными в Реакторе инструментами и плагинами как полноценными VST и VSTi
 
Waves представляет 12-ю версию свих плагинов.
WHAT'S NEW IN WAVES V12
RESIZE YOUR PLUGINS
5 adjustable sizes to view your plugins as large or small as you want to.
LIGHTNING-FAST PRESET BROWSER
Find & audition the perfect presets with instant text search.
RETINA-READY GRAPHICS
Enjoy sharper graphics & optimized GPU performance on Macs with retina displays.
FUTURE-PROOFED COMPATIBILITY
Full ongoing compatibility with the latest DAWs & operating systems.
FREE PLUGINS ADDED TO SELECT BUNDLES
Platinum, Horizon, and Diamond owners get LoAir, Smack Attack, Submarine.
 
Wavesfactory Cassette v1.0.5, заявлено 50% снижение жора на Win.

- Improved: 50% less CPU consumption on Windows.
- Fixed: crash when internet connection is not available.

 
  • Like
Реакции: Arlekin, AL3X и X-Quality
Spire обновили до 1.5.4
Что же так неинформативно)
* Minor bug fixes for AAX version
* Added "Open folder" by right mouse click
* Added option "Convert legacy bank/preset on import"
* Added option "Don't create "init" preset on disk"
* ModWheel parameters are saved in the presets
* Minor improvements for GUI
 
  • Like
Реакции: TrDI и Dmitry Anderson
Speedrum Lite теперь 0.8.1


+ Cut and Cut By indicators on a pad
# fixed random crash or gui freeze
# fixed MIDI select pad behavior
# fixed some gui font inconsistencies

______________________________________________________


Тут тоже есть обновления:
 
Последнее редактирование:
AAS по традиции, испортили фейс Chromaphone


Changes in Chromaphone 3
  • Home view: The Home view presents a distraction free and laid-back browsing and tweaking experience.
  • Two-Voice Multitimbral: Two independent timbres—stacked or split—create performance-friendly, texture-full, and spacious sounds.
  • Macros: Four performance macros per layer that respond to user-defined MIDI controls. Each and every sound features modulation, timbre, envelope, and effect morphing assignments that can be played in real time for enhanced expressivity and sonic dimension.
  • Browser: The brand-new browser offers an efficient way to home in on the right sounds thanks to the Packs, Sounds, Categories, and Creators views.
  • Factory Library: Chromaphone 3’s factory library contains 421 never heard before sounds as well as refined versions of the 670+ Chromaphone 2 presets.
Chromaphone 3 is available now at an introductory price of $99 USD until November 20th, 2020 (regular $199 USD). It comes in VST, AU, RTAS, and AAX plugin formats. Exiting Chromaphone users can upgrade for $39 USD.
In celebration of the update, the Chromaphone 3 +PACKS bundle including all 14 expansion sound packs is now just $189 USD (regular $389 USD) and all sound packs for Chromaphone are $19 USD during the promotion (regular $39 USD).
 
Ещё Valhalla обновления:
Supermassive 1.2.0 (two new reverb/delay modes: Cirrus Major и Cirrus Minor)
Valhalla Delay 1.8.2 (two new delay modes: LoFi and PitchDuck)

 
@Wham_48, :Dle60: New in 1.2.0: VST3, signed & notarized installers that are ready for Big Sur, signed Windows installer!
 
  • Like
Реакции: Arlekin, Wham_48 и Nagor
Parawave released version 1.8.5. of Rapid.

If you are a customer, you can download it now on your Purchased Products page.

CHORUS X

A new effect slot for RAPID. It's a multi-stage dual chorus that can be used to create vintage-sounding ensemble chorus effects, phasing fx, small plate reverbs and much more. Various unique parameters allow a detailed and versatile control over the chorus stages and offer a variety of characteristics. The stereo visualization of each stage gives you a good idea of what the overall result will sound like.

Image


VINTAGIZER

Another new and unique effect. Various emulations and vintage processors are applied to the signal to reproduce the behavior of old devices such as vinyl, cassette tapes, wire recorders and much more. This effect is perfect for LoFi genres. With 24 different device models with loudspeaker, drift, artifact, tube and noise control, you can fine tune the desired result and quickly give vocals or general sounds a unique touch.

Image


IMPROVED BROWSER

The sound preset browser on the master page now consists of different views. The new search view offers a quick way to search for presets by entering a keyword. In addition, multiple tags and other filters can be applied to quickly find presets for your purpose. Each preset can be marked as a favorite or added to a custom preset collection to enhance the workflow with many presets and projects. Moreover, the browser got many small features like renaming and duplication of presets.

Image


LAYER LOADING

The improved browser now allows you to drag and drop presets. To load a preset directly into a layer, simply drag the preset file onto one of the eight layer buttons. This allows you to create massive patches instantly by joining previously created sounds into one large patch.

Image


Support for Big Sur and Apple Silicon

With the latest version of Mac OS 11 (Big Sur), Apple presented its new ARM-based Apple Silicon M1 chips. Previously, Rapid 1.8.0 could already be executed with the Rosetta 2 Intel to ARM emulator supplied. To provide the best performance for this new platform, Rapid for Mac now natively supports the ARM64 instruction set.

Change Log
Additions:
  • New effect: Chorus X.
  • New effect: Vintagizer.
  • New insert: Sample and Hold.
  • Preset search: Sort by type, name, bank or date.
  • Filter presets by type tags, keywords, bank or author.
  • Copy, Paste, Duplicate, Rename and Browse functionality for preset entries in the browser.
  • Drag and Drop preset entries to other banks.
  • Preset favorites: Can be marked by a star and are now browsable in the favorite view.
  • Preset collections: Reference presets in multiple favorite lists.
  • Layer Loading: Drag and Drop preset entries onto layer buttons to load the first layer.
  • New Options: Set the default output level to 0, -3, -6, -9 or -12 dBFS.
  • Compability for MacOS 11 (Big Sur) and Apple Silicon (ARM64) platform.
Changes:
  • Increased bitcrusher fx rate reduction accuracy at high frequencies.
  • Currently selected bank and preset row is now restored if the plugin instance is reloaded or duplicated.
  • Deleting user library samples will now move the files to the trash bin.
  • Removed preset browser "One-Click" loading option. This can be done now by using the middle mouse button, or shift key + left click, or command key + left click.
Fixes:
  • Changing the bank/preset sort order will now retain the selected row.
  • Hanging note events in some DAWs that unusually triggered on/off when stopping or using a visual keyboard.
  • Hanging notes due to small loops in arpeggiator MIDIs that had adjacent notes at the end of the loop.
  • Avoid out of bounds index access when resynthesizing samples with very low root note resampling ratios.
Visual:
  • Changed the oscillator source browser colour scheme to a dark theme.
  • Added hover states for preset and content lists.
Presets:
  • 54 Chorus X Presets.
  • 45 Vintagizer Presets.
  • 29 Rapid FX Presets.
  • 9 Feature Presets.
---

Get the newest demo here.
 
  • Like
Реакции: Greev и AL3X
OB-Xd 2.2
  • Universal 2 Binary for Apple M1 Silicon chips.
  • AAX ProTools plugin support for macOS and Windows (registered version only).
  • Catalina and Big Sur documents folder crash fix.
  • Updated framework (JUCE 6).
  • Updated VST3 SDK.
  • Added ASIO and Jack support.
  • macOS deployment target set to 10.9.
  • Preset navigation using + / - keys (numeric too).
  • 16 new presets by J3PO.
https://www.discodsp.com/obxd/


Боже, наконец они сделали листание пресетов!!! Срочно обновляться :)
 
KV331 Audio SynthMaster неторопливо обновился до версии 2.9.9

 
Последнее редактирование:

Сейчас просматривают