По поводу работы с оранжевым, ежели кому интересно, вот копия одного поста (проверял, все работает):
Orange Vocoder.
How to MIDI control the carrier:
This example was made using SONAR but I think it will work on every sequencer, same routing, different interface.
Setup:
Track1(modulator): Set an audio track with the vocals or live recording.
Track2(carrier): Set an audio track with an VSTi or DXi. I use dreamstation with an sawtooth waveform, you can use the sound or VSTi/DXi you like, just take in mind that sine wave is poor for vocoding purposes (no harmonics) and Sawtooth wave (all harmonics)or another waveform like that works better.
Track3: A MIDI track to control Dreamstation.
AUX1: Set Orange Vocoder and turn off "Use synth" (it will use the external signals), you can also remove the reverb amount (just for better sound) and lift a bit the `mid-high` frequencies in the visual nodes eq.
Routing:
Track1: Set the Volume to -inf db and the FX send to zero db and hard pan the FX to the left.
Track2: Set the Volume to -inf db and the FX send to zero db and hard pan the FX to the right.
AUX1: Leave it that way.
That's it!..Voila!!!.....now you can MIDI control any carrier you want..