Железо - Операционная система: Win7х64(--==WINDOWS 7 X86&X64 SP1 LITE ©SPA 2011(6.07.11))
Процессор AMD Phenom II X6 1100T 3.3 GHz 9Mb Socket-AM3(не разогнаный)
Память DDR3 1333MHz Dual Channel 8Gb
Ситеьный диск SSD 60 Gb SATA 6Gb/s OCZ Vertex 3
Произошла ошибка при закрытии проекта в Cubase 5 X32bit( от AiR) Памяти на данном проекте было задействовано 3,4 Gb(Были проекты до 6 Gb - а ТАКОГО не было!)"A problem has been detected and windows has been shut down to prevent damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you`ve seen this stop error screen,restart your computer.If this screen appears again,follow these steps :
Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your
hardware or software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such
as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press
F8 to select Advonced Startup Options,and then select Safe Mode.
Technical information:
*** STOP: 0x00000050 (0xFFFFFFFF8A05E008,0x0000000000000000,0xFFFFF80002AA4D68,0x0000000000000005)"
подскажите - в чём проблемма (ставил обновления от Microsoft - результат тот же)
Процессор AMD Phenom II X6 1100T 3.3 GHz 9Mb Socket-AM3(не разогнаный)
Память DDR3 1333MHz Dual Channel 8Gb
Ситеьный диск SSD 60 Gb SATA 6Gb/s OCZ Vertex 3
Произошла ошибка при закрытии проекта в Cubase 5 X32bit( от AiR) Памяти на данном проекте было задействовано 3,4 Gb(Были проекты до 6 Gb - а ТАКОГО не было!)"A problem has been detected and windows has been shut down to prevent damage to your computer.
PAGE_FAULT_IN_NONPAGED_AREA
If this is the first time you`ve seen this stop error screen,restart your computer.If this screen appears again,follow these steps :
Check to make sure any new hardware or software is properly installed.If this is a new installation,ask your
hardware or software manufacturer for any windows updates you might need.
If problems continue,disable or remove any newly installed hardware or software.Disable BIOS memory options such
as caching or shadowing.If you need to use Safe Mode to remove or disable components,restart your computer,press
F8 to select Advonced Startup Options,and then select Safe Mode.
Technical information:
*** STOP: 0x00000050 (0xFFFFFFFF8A05E008,0x0000000000000000,0xFFFFF80002AA4D68,0x0000000000000005)"
подскажите - в чём проблемма (ставил обновления от Microsoft - результат тот же)
Последнее редактирование модератором: