2.14 (2015-07-22)
  improvements:
  - X-USB and DN32-USB were reporting wrong sample rate after changing sample rate without reboot

2.13 (2015-07-06)
  improvements:
  - fixed an issue where iQ speaker settings were not recalled correctly when linked
  - iQ setup now also accessible via layer buttons
  - fixed an issue where inserts were not activated when usb was very busy during startup
  - correct preamp indication on DL152..DL155, output SRC disabled on DL155
  - fixed an issue where midi messages were duplicated when assigned to more than one assignable
    button/encoder simultaneously

2.12 (2015-06-01)
  improvements:
  - HUI level meters and LCD fixed
  - DHCP menu on X32CORE fixed
  - fixed rare issue where aes50 slave mode won't sync
  - iQ speaker settings moved to /outputs/p16 path
  new features:
  - iQ speaker link function

2.11 (2015-04-09)
  improvements:
  - load show file in X32CORE fixed (snippet offset)
  - fader motor issues on M32/M32R (minimum position) fixed
  - exclude hidden and system files from usb file list
  - correct indication of 0 dB fader position
  - scene GO and UNDO leds fixed
  - DHCP can be selected on X32CORE
  - bus AFL solo correctly uses pan when bus is routed to LR
  new features:
  - support for M32C, S32, DL32, DL231

2.10 (2014-11-20)
  improvements:
  - screen flicker when switching between pages with overlay graphics removed
  - improved clock stability in Dante slave mode
  new features:
  - rta detector selection (rms/peak), peak hold, and adjustable decay time
  - gate section: expander with adjustable range
  - compressor section: compressor/expander with auto mode

2.09 (2014-10-23)
  improvements:
  - fixed issue where usb drives were not recognized when connected during power-on
  - setup/global and setup/config screens rearranged
  - sample rate can now be changed without reboot
  - issue with mute menu on scenes/home screen fixed
  - some redraw issues related to mute menu fixed
  new features:
  - safe shutdown (incl. usb recorder shutdown), console reboot, firmware update, factory reset added to setup
  - selectable 12h (am/pm) and 24h clock mode
  - new options: hard mute groups, dcas as mute groups, invert mute leds (for broadcast use)
  - DHCP

2.08 (2014-09-12)
  improvements:
  - Xedit bug fixed when changing fx type
  - xlr out routing added to routing snippet
  - p16 and aes/ebu routing added to out patch snippet
  - jitter when syncing to adat/word clock/madi reduced
  - sporadic noise when switching between special combinations of fx types removed
  - sporadic click at end of usb playback removed
  - sporadic reboot when using too complex osc subscriptions (old X32-mix on iPad 1) fixed
  - sporadic loss of meter information (osc clients) fixed; osc server version 2.05
  new features:
  - support for DN32-MADI, DN32-DANTE, DN32-ADAT
  - support for DL15X and DL25X stage box series
  - iQ control via stage box P16 port (requires fw >= 2.0 on S16/DL16)

2.07 (2014-06-26)
  improvements:
  new features:
  - support for DL16
  - M32 support

2.06 (2014-06-16)
  improvements:
  - cue delete fixed
  - dante card playback gain fixed
  - 'use rta source' for geq fixed

2.05 (2014-05-27)
  improvements:
  - fixed incorrect power-on channel mute state when assigned to mute groups
  - fixed issues with right fader bank when in geq on faders or remote mode
  - fixed dyn key meter on M/C channel
  - osc server updates to support fast sync mode w/ X32Edit
  - tap function improved
  new features:

2.04 (2014-04-23)
  improvements:
  - minor graphics and parameter name fixes
  new features:

2.03 (2014-04-11)
  improvements:
  - acceleration for user assignable rotaries on assign home page
  - screen flicker and delay fixed when loading cues/scenes/snippets
  - scene management improvements and fixes
  - remote encoders on assign home page now correctly send out midi messages
  - osc server enhancements for X32edit 2.x
  new features:
  - mix control on compressors (parallel compression option)

2.02 (2014-03-11)
  improvements:
  - aux/fxrtn sends to subgroup fixed
  - output routing tap selector fixed
  - dry switch on dimensional chorus
  - to end all these discussions: hold sends on fader button (> 1s) to stop blinking
  - stereo delay mono feed diagram corrected
  - preamp remote control issue with linked channels fixed
  - X32CORE scene recall and show import fixed
  - snippets fixed (problem with 1st data line)
  - usb recorder assign key 'PREV' fixed
  - GO button led fixed
  new features:
  - assignable controls can be accessed on X32RACK by pressing MUTEGRP & UTILITY simultaneously
  - midi control of mute groups (CC #80..85 on channel 2 [B1 50 xx .. B1 55 xx])
  - midi snippet recall ([C1 xx])
  - midi cue recall ([C2 xx] 0..127, [C3 xx] 128..255, [C4 xx] 256..383, [C5 xx] 384..499)
  - cue and snippet recall on assignable buttons (including name display on small lcds and assign home screen)
  - M/C can be used as effect send bus (FX 1..4)
  - V1.x scene/show/library conversion

2.01 (2014-01-23)
  improvements:
  - dual enhancer fixed
  - file version check (show/libs)

2.00 (2014-01-22)
  improvements:
  - new eq encoder assignment (main lcd)
  - channel icon/name visible on fx inserts (dual mono only)
  - console init bus send 1-8 default now post eq instead of pre fader
  - faders disabled when locked and remote controlled
  - comp threshold range reduced to -60..0 dBFS
  - sends on fader button flashing
  - relaxed sends on fader function (automatically deactivated only by pressing DCA button)
  - improved indication of sends on fader signal flow on small displays
  - stagebox lock moved to setup/preamp page
  - increased parameter resolution on rackamp
  - increased sensitivity on deesser
  - gain reduction meter on precision limiter
  new features:
  - eq on fx return channels
  - expander mode (1:2, 1:3, 1:4) in gate section
  - 100 band rta/spectrograph (on meter page and as overlay on eq and geq screens)
  - user assign rotaries available on assign home page (for producer/compact)
  - console lock on HOME button (2.5s), doubles as safe shutdown
  - individual eq band reset (w/ undo)
  - dca level meters (max post fader level of assigned channels)
  - additional pre gate tap for bus sends
  - additional post gate tap for outputs
  - output routing w/ optional muting (e.g. mute P16 feeds w/ channel mutes)
  - smart handling of send levels when changing bus mode
  - gate / comp key signal level indication
  - additional lcd color modes (inverted display)
  - xlr outputs added to routing matrix (e.g. foh passthru)
  - sends on fader for mono/center bus and matrices (bidirectional)
  - fader extend mode (input channels on bus faders); press two bank select buttons simultaneously (Producer and Compact only)
  - gain split mode for foh/mon; ha gains can only be set on setup/preamp page, channels have trim only
  - gain remote option; allows console gains to be remote controlled by another console (e.g. use X32RACK as stagebox)
  - when pushing the effects button or selecting a channel while on any fx page, the corresponding fx and layer is 
    automatically selected when used as insert on selected channel or as send effect on selected bus
  - jump to page user function optionally includes fx layer
  - midi control of channel level, mute, and pan
  - freeze function on vintage room
  - lots of new effects
  - new scene management (cues/scenes/snippets)
  - faster boot time and smaller update file size
